Resultate: Produktsuche (only available in english)

Panels / plates

Composition/Properties:

High Pressure Laminate for test adapters with antistatic surface Black version

Markets:

Elektronikindustrie

Description:

Antistatic laminate for test adapter based on phenolic paper and glass coverlayer

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

High pressure laminate suitable for mechanical and electrical applications Very low smoke emission and toxicity in case of fire Halogen free Flame resistant acc. to UL 94 (class V0 at 4 mm thickness) Approved acc. to EN 45545, steps R22/R23

Thermal Class: 120°C

Markets:

Schienenfahrzeugbau, Luftfahrtindustrie, Haushaltsgeräte

Description:

Canevasite F18 V0 HF is a standard cotton fabric laminate bonded with halogen free epoxy resin.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

Increased temperature resistance : temperatures higher than 300°C. Better flux and chemical resistance. Dissipative material.Surface resistivity 10E5 to 10E9 Ohm/Square. Low deformation. Excellent dimensional stability : good mechanical characteristics. Good machinability.

Markets:

Elektronikindustrie

Description:

CDM Durapol 68910 is a composite material made of glass mat, combined with a high mechanical resistance resin system. Static and its companion ESD (electrostatic discharge) damage electronic components and circuits every day. To use CDM Durapol ESD will allow charges to move slowly out of the circuit and will ensure the quality of your production. CDM Durapol ESD product have guaranteed dissipative characteristics. The CDM Durapol range of products exhibits higher mechanical and resistance properties as standard composite materials. The random glass mat substrate present in the CDM Durapol 68910 minimizes delaminations problems during machining or pallet use. The relative low thermal conductivity in the CDM Durapol materials allows quick pallet turnaround eliminating most of the time both the necessity to provide a cooling station and the process heat sink effect experienced in the metallic pallets. CDM Durapol materials can substitute metallic solder frames with great advantages. This product was referenced as Durapol L 200 in the past.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

New material developed for short run soldering pallets. Good performances at standard temperatures of 280 - 300°C. Dissipative material with guaranteed values. Surface resistivity 10E5 to 10E9 Ohm/Square. Low deformation. Excellent dimensional stability : good mechanical characteristics Good machineability.

Markets:

Elektronikindustrie

Description:

CDM ESD 68630 has been especially developed for short run soldering pallets. This competitive material presents very satisfactory technical values with high economical advantages. CDM ESD 68630 is a composite material made of glass mat, combined with a high mechanical resistance resin system. CDM ESD 68630 product have guaranteed dissipative characteristics. The CDM range of products exhibits higher mechanical and resistance properties as standard composite materials. The random glass mat substrate present in the CDM ESD 68630 minimizes delaminations problems during machining or pallet use. The relative low thermal conductivity in the CDM materials allows a rapid pallet turnaround eliminating most of the time both the necessity to provide a cooling station and the heat sink effect experienced in the metallic pallets. CDM materials can substitute metallic solder frames (or other materials) with great advantages. Flux resistance is depending on composition and pH level. Highly acid as well as basic fluxes often require a regular cleaning of remaining powders in order to preserve the stability of CDM materials. CDM ESD 68630 presents good resistance to chemical attacks. Due to the high fiberglass content, machining is recommended with carbide or diamond toolings. Precise machining with very accurate tolerances can be achieved by experts in the conception and machining of pallets.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

Good performances with lead free soldering process. Increased temperature resistance : good performances at temperatures higher than 300°C. Excellent flux resistance. Dissipative material. Surface resistivity 10E5 to 10E9 Ohm/Square. Optical sensitiveness : grey color enables an easy and improved detection by infra-red cells. Low deformation. Excellent dimensional stability. Improved machinability.

Markets:

Elektronikindustrie

Description:

The CDM range of products exhibits higher mechanical and resistance properties as standard composite materials. The random glass mat substrate present in the CDM ESD 68940 minimizes delaminations problems during machining or pallet use. The relative low thermal conductivity in the CDM materials allows a rapid pallet turnaround eliminating most of the time both the necessity to provide a cooling station and the process heat sink effect experienced in the metallic pallets. CDM materials can substitute metallic solder frames (or other materials) with great advantages. Flux resistance is depending on composition and pH level. Highly acid as well as basic fluxes often require a regular cleaning of remaining powders in order to preserve the stability of CDM material. Due to the high fiberglass content, machining is recommended with carbide or diamond toolings. Precise machining with very accurate tolerances can be achieved by experts in the conception and machining of pallets.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

Tested up to 350°C High Temperature resistance Excellent Thermal stability Excellent mechanical characteristics Easy to machine Long life expectancy Good hydroCarbon and chemical stability

Markets:

Pressen und Öfen

Description:

Deltherm 67800 is a reference based on a combination of glass mat and an innovating high performance thermoset resin system.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

High Pressure Laminate for requirements between FR-3 and FR-4 Good punchability at good mechanical properties Low water absorption Defined burning rate acc. to UL 94, class V0 European origin

Thermal Class: 130°C

Markets:

Elektronikindustrie

Description:

EP 105 is a sandwich laminate based on epoxy resin glassfabric coverlayers and an epoxy paper core. Due to the special build up especially the flexural strength is substantially increased and electrical properties nearly reach FR-4 level. This quality usually is used for applications where mechanical properties of FR-3 are not sufficiant, but high FR-4 level is not necessary. Technical values were measured on a 1,0 mm sheet thickness.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

High Pressure Laminate for antistatic applications Defined surface resistance Defined burning rate acc. to UL 94, class V0 Mechanical properties compareable with standard EP 105

Thermal Class: 130°C

Markets:

Elektronikindustrie

Description:

EP 105 AS is a sandwich laminate based on a core of paper impregnated with an epoxy resin and a glass fabric impregnated with a antistatic epoxy resin on the surface.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

New material developed for TOP COVER PALLETS - product still in development phase. Dissipative material with guaranteed values. Very good dimensional stability : good mechanical characteristics Very good machineability compared to standard woven glass materials. .

Markets:

Elektronikindustrie

Description:

TOP PALLET ESD 68920 is especially developed for specific ESD Top Cover Pallets in order to maintain in place the PCB components in ESD Safe environment. This competitive material presents very satisfactory technical values with high economical advantages. TOP PALLET ESD 68920 is a composite material made of glass mat, combined with a mechanical resistance resin system. This product has guaranteed dissipative characteristics and contributes to the ESD SAFETY optimization on components which are hold in place during wave or selective soldering assembly. TOP PALLET ESD 68920 is the perfect complementary reference to associate with the CDM Durapol range of products widely used for bottom solder pallets. Due to the high fiberglass content, machining is recommended with carbide or diamond toolings. Precise machining with very accurate tolerances can be achieved by experts in the conception and machining of pallets.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

High Pressure Laminate for high mechanical and electrical requirements at high temperatures High temperature resistant resin matrix, therefore suitable up to 200°C Especially suitable for thermal insulation of presses

Thermal Class: 180°C

Markets:

Pressen und Öfen

Description:

Vetronite EGR T23 is a laminate based on special high temperature resistant epoxy resin and glass roving.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

High Pressure Laminate for high mechanical and electrical requirements Defined burning rate acc. to UL 94, class V0 UL-registered under File no. E47629 Approved at Airbus Product of EU-origin

Thermal Class: 130°C

Markets:

Automobilindustrie, Luftfahrtindustrie, Elektronikindustrie

Description:

Vetronite EGS 619 is a standard laminate based on epoxy resin and glass fabric.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

High Pressure Laminate for antistatic applications Defined surface resistance Defined burning rate acc. to UL 94, class V0 Mechanical properties compareable with standard Vetronite EGS 619

Thermal Class: 130°C

Markets:

Elektronikindustrie

Description:

Vetronite EGS 619 AS is a laminate based on epoxy resin and glass fabric, completely antistatic.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

High Pressure Laminate for antistatic applications Defined surface resistance Defined burning rate acc. to UL 94, class V0 Mechanical properties comparable with standard Vetronite EGS 619

Thermal Class: 130°C

Markets:

Elektronikindustrie

Description:

Vetronite EGS 619 AS Comp is a laminate based on epoxy resin and glass fabric with antistatic surface.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

High Pressure Laminate for high mechanical and electrical requirements Defined burning rate acc. to UL 94, class V0

Thermal Class: 130°C

Markets:

Automobilindustrie, Luftfahrtindustrie, Elektronikindustrie

Description:

Epoxy glass fabric laminate (FR-4)

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

High Pressure Laminate suitable for demanding mechanical and electrical applications at elevated temperatures Low smoke emission and toxicity in case of fire (EN 45545-2:2013 R22/R23) UL 94, class V0 listed under file no. E47629 Special CTI value 600M Temperature class H

Thermal Class: 180°C

Markets:

Stromübertragungsnetz, Stromspeichersysteme, Schienenfahrzeugbau, Luftfahrtindustrie

Description:

Vetronite FR-5 HF CTI 600M is a special grade of insulating laminate made of glass fabric bonded with halogenfree epoxy resin offering an outstandig CTI value for demanding applications. It has a temperature index of 180°C ands is especially used for such applications where spikes and dirt contamination, causing higher tracking current, has to be expected. Beside the UL-approval it is certified acc. to several railway fire and toxicity norms.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

High Pressure Laminate with good mechanical and electrical properties "Low smoke" material, especially suitable for aircraft and aeronautics Approved acc. to Airbus specification ATS 1000.001 / FAR 25853

Thermal Class: 120°C

Markets:

Luftfahrtindustrie

Description:

Vetronite PGS is a laminate based on phenolic resin and glass fabric.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

Low heat conductivity Excellent tolerances with respect to parallelism Long life expectancy Low water absorption Good hydroCarbon and chemical stability Excellent mechanical durability

Markets:

Pressen und Öfen

Description:

Von Roll offers a complete range of temperature resistant materials with well established performance. The low thermal conductivity of our products allows to achieve substantial energy costs savings. As a result of the very low water absorption and chemical stability, there is an increased life expectancy of the thermal insulation materials offered by Von Roll. The products are based on glass fabric, glass roving, glass mat and mica paper as well as high temperature resistant resins. Our products are free of asbestos, high temperature resistant, and possess a good mechanical resistance even at elevated temperature. From a mechanical point of view, these materials can be easily machined. In addition to our CNC capabilities in our fabrication centers, we also can drill, turn, sand and in general meet all customer requirements in our modern machining centers. By sanding the pressed sheets, we are able to achieve tight thickness tolerances and parallelism. Call our customer or technical departments for specific information. Our departments will be able to recommend the optimal use of the products and to provide the technical assistance you may need.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

Asbestos free Excellent mechanical durability and steadiness of the properties especially at high temperatures Long life expectancy Low water absorption Good hydroCarbon and chemical stability Low heat conductivity Excellent tolerances with respect to parallelism

Markets:

Pressen und Öfen

Description:

Laminate for thermal applications.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

PRELIMINARY DATASHEET Excellent mechanical durability and steadiness of the properties at high temperatures Long life expectancy Low heat conductivity Excellent tolerances with respect to parallelism Very good electrical properties Good chemical stability

Markets:

Pressen und Öfen

Description:

Laminate for thermal applications.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.

Composition/Properties:

Low heat conductivity Excellent tolerances with respect to parallelism Easy to machine Long life expectancy Low water absorption Good hydroCarbon and chemical stability

Markets:

Pressen und Öfen

Description:

Von Roll offers a complete range of temperature resistant materials with well established performance. The low thermal conductivity of our products allows to achieve substantial energy costs savings. As a result of the very low water absorption and chemical stability, there is an increased life expectancy of the thermal insulation materials offered by Von Roll. The products are based on glass fabric, glass roving, glass mat and mica paper as well as high temperature resistant resins. Our products are free of asbestos, high temperature resistant, and possess a good mechanical resistance even at elevated temperature. From a mechanical point of view, these materials can be easily machined. In addition to our CNC capabilities in our fabrication centers, we also can drill, turn, sand and in general meet all customer requirements in our modern machining centers. By sanding the pressed sheets, we are able to achieve tight thickness tolerances and parallelism. Call our customer or technical departments for specific information. Our departments will be able to recommend the optimal use of the products and to provide the technical assistance you may need.

Wir verwenden die von Ihnen angegeben Daten um Ihre Anfrage in unserem Unternehmen zu bearbeiten und mit Ihnen dann gegebenenfalls Kontakt aufzunehmen. Weitere Infos zum Datenschutz finden Sie in unserer Datenschutzerklärung.